Trumpf offers pay-per-part business model

The EuroBLECH 2022 exhibition (Hanover, 25-28 October) will see Trumpf unveil a new digital pay-per-part business model for its full-service TruLaser Center 7030 laser cutter. Using an equipment-as-a-service (EAAS) model, the company will supply customers with this high-output machine along with a material storage system. These customers will be able to use the TruLaser Center 7030 for their own manufacturing requirements.

Trumpf will have access to the machine from its remote control centre in Neukirch without the customer having to be present all the time. For this purpose, the full-service laser machine is fitted with cameras, sensors and remote-control systems. Trumpf will be able to schedule and oversee manufacturing processes remotely, and provide machine programming and maintenance.
For further information www.trumpf.com

14th edition of Toolex set to open

The Toolex 2022 exhibition will open its doors this week (4-6 October) at the Katowice International Congress Centre in Poland. This international trade fair for machine tools, tooling and processing technology is now in its 14th edition. At the last Toolex around 10,000 visitors attended to 500 exhibitors from 13 countries.

Katowice in southern Poland is where many factories in the automotive, mining, metallurgical, energy and chemical industries have their machine shops. Each has the ambitious goal of increasing the availability of their machines, improving safety standards and cutting the overall cost of production. Toolex provides the answer to the needs of companies that want to pursue these goals by means of optimising their machining resources.

For further information www.toolex.pl

Alucast looks to deliver £800,000 sales boost

A West Midlands aluminium foundry is reaping the benefits of a move to ‘servitization’ and forecasts that it will add nearly 10% to its annual turnover. Alucast, which employs over 100 people at its growing factory in Wednesbury, has invested nearly £500,000 in new technology to ensure that it now provides customers with access to Magmasoft casting simulation, prototyping and heat treatment. The company has also expanded its CNC capacity to offer five-axis machining and non-destructive testing, including X-ray and dye-penetrant testing.
For further information www.alucast.co.uk

New XYZ showroom draws the crowds

XYZ Machine Tools was pleasantly surprised by the number of people attending the opening of its latest showroom. Located just off the M62 near Huddersfield, the 5000 sq ft showroom contains an extensive selection of XYZ machines, all under power and available for customer demonstrations and training. Thanks to its proximity to the motorway network, visitors travelled from across the north of England for the open day, with orders received for six machines and many requests for quotes.

Nigel Atherton, managing director at XYZ Machine Tools, says: “Due to its location we expected a good response from customers, but even we underestimated the turnout. In total we had 94 people from 55 companies attend the day, about 50% more than we anticipated. Our 40-space car park was overflowing at times. Overall it was very encouraging and indicates that there’s still lots of positive sentiment in the manufacturing sector.”
For further information www.xyzmachinetools.com

START-UP BUSINESS TARGETS SUCCESS BY INVESTING IN TOOLING FROM ITC

Founded at the height of the pandemic in September 2020, Axi5 Ltd is a subcontract company that manufactures high-end bespoke components for the motorsport, oil, gas and press tool industries, as well as designing and producing specialist tooling and tool holders. The company set itself up for success from the start with the purchase of a Mazak Integrex i-100 five-axis multi-tasking turn-mill centre, a Hurco VM10i machining centre, hyperMILL CAM software from Open Mind Technologies and cutting tools from Industrial Tooling Corporation (ITC).

With these investments, the Southam-based company has made a phenomenal start in its first two years of business. Like any business, the support of supply chain partners can be instrumental to success, and Axi5 has recognised this on numerous occasions, where ITC has supported the fledgling business with everything from Widia VariMill end mills, general purpose Widia Hanita end mills, Widia VDS drills and ITC’s extensive range of thread mills. When the small business was having challenges machining a series of high-end components, it was ITC’s application engineer Simon Yeomans who was on hand to support the company.

With demand for regular batches of 50 to 100-off parts from a prominent company, Axi5 was having issues with its cutting tool performance. As the company anticipated that the project would be an ongoing regular commitment from the customer, a solution was needed. Axi5 called upon ITC to solve the problem. On its compact Hurco VMC, the Warwickshire manufacturer set up two Microloc clamping systems to machine 100 mm diameter billets that are 92 mm long. The set-up was clamping on 15 mm of stock with a bar protrusion of 77 mm.

Despite the robust performance of the Microloc system, rough machining a square profile in round billets created excessive noise and did not give the Axi5 team the confidence to leave the machine to run through its cycle. As well as creating excessive noise, the 25 mm diameter indexable end mill was also providing limited tool life and poor material removal rates. Investigating the process, Yeomans recommended the Widia VXF high-feed 52 mm diameter face mill with five insert seats for the rough machining of the parts.

With two parts clamped on the machine and milled in a single operation, the previous cycle time with a competitor tool was 15 minutes, something that ITC rapidly cut to just under nine minutes: a 40% cycle time saving. This was achieved by executing cutting parameters of 163 m/min with 0.75 fz (feed per tooth) and 0.8 ap (axial depth of cut), with a ramp angle of 0.7°. The result was that ITC had overcome the challenge of machining 15-5PH stainless steel parts annealed to BM9050, with a significant productivity increase.

The key challenge for Axi5 was having the confidence to walk away from a process that was creating lots of noise. Thankfully, the smooth cutting action of the Widia VXF high-feed face mill eliminated excessive noise and chatter, and gave the small business confidence to allow the machine to run unattended. The cutting characteristics of the ITC Widia VXF tool also delivered reduced costs and prolonged tool life.

With two parts clamped in the work envelope simultaneously, Axi5 could only machine four parts before an insert change was required with the previous tool. However, the ITC Widia VXF could machine three batches of parts as opposed to two: six parts instead of four. This performance on a particularly difficult material equated to one hour of machining time for each insert edge with the Widia VXF face mill. Equally impressive is the ability of the new ITC Widia tool to reduce costs for the business. On a run of just 600 parts, ITC is expected to save Axi5 over £4000, or £6.60 per part.

As a company utilising the latest machine tool technology to produce a wide range of materials that stretches from steel and stainless steel to titanium and nickel and chromium-based superalloys, the journey with ITC is just getting started and the cost savings and productivity improvements will continue.

Axi5’s production director and co-owner Dave Wear says: “We’ve known the ITC team from previous roles with other businesses and their support and products have always been outstanding. So, when we set up our own business, ITC was one of the first companies we called. They are a UK manufacturer, which means they hold stock of thousands of items and provide next-day delivery. This is not often the case with overseas manufacturers. The pricing structure is clear and concise, and we also utilise their re-grind service. As a small business in the early stages of growth, having a re-grind service to minimise our costs and waste is of critical importance. Our next step will be to have a consignment stock of ITC products.”

He continues: “The product quality is second to none and we have improved tool life and cycle times over and again with the Widia range from ITC. The ITC thread mills are also giving us three-times more tool life when compared with previous products. We have outstanding support, friendly advice, an unfathomably wide choice of products, industry-leading performance and the majority of tools are manufactured in the UK – what more could a manufacturer want from its cutting tool supplier.”
For further information www.itc-ltd.co.uk