UK’s first Universal Robots training centre

RARUK Automation has opened the UK’s first Universal Robots authorised training centre at its headquarters in Shefford, Bedfordshire.

The move will allow the company’s certified UR trainers to provide tuition in collaborative robot (cobot) programming, empowering UK customers to get the best return from their UR investment. Says Mark Gray, UK sales manager at Universal Robots: “Through our partnership with UK application specialists such as RARUK Automation we can now expand our online training to hands-on classes, so manufacturers can extend their use of cobots and drive even more value from their automation investments and employees.”
For further information www.rarukautomation.com

Leading from the front and by example

Mills CNC, the exclusive distributor of Doosan machine tools in the UK and Ireland, has supplied Hertfordshire-based precision subcontract specialist Qualiturn Products with a Doosan DVF 5000 five-axis machining centre.

The machine, one of the first in the UK, was installed at Qualiturn’s modern and spacious 20,000 sq ft facility in February 2019, and was timed to coincide with the company’s relocation to these new premises.
Says Nick Groom, Qualiturn’s managing director: “We operate a high-productivity, highly-efficient and flexible milling cell that runs 24/7 and provides customers with high-quality, competitively-priced machined components, delivered in double-quick time. The DVF 5000 investment was made to improve our milling capabilities and complements our existing technologies.
“We are keen advocates of one-hit machining and, wherever possible, look to automate our processes,” he adds.
This commitment to continuous improvement through automation led Qualiturn (in 2014) to invest in its first Lang Robo-Trex robot system. The system uses mobile trollies which are loaded with multiple vices that hold workpieces. These workpieces – when prepped – are loaded into the Doosan DNM 650 machining centre by the system’s robot.
Such has been the success of the DNM 650/Lang Robo-Trex automated manufacturing cell that the company decided to invest in a second cell based on the new DVF 5000.
Says Groom: “Our new cell is fully operational and runs 24/7. The Doosan DVF 5000 is a high-performance machine and, by integrating it with an automated parts-handling system, we’ve been able to exploit its full potential. As a result we have experienced dramatic productivity gains and significantly reduced lead times, both of which make us more competitive.”
For further information www.millscnc.co.uk

Advancing into new dimensions

The first portal milling machine in the new Endura 900 Linear Compact series from Fooke is now in operation at Arnstädter Werkzeug und Maschinenbau (AWM). The installation is also a premiere for AWM: the company is venturing into new territory and can now handle tool weights of up to 20 tonne (previous capacity was 10 tonne). Fooke is represented in the UK by Phase 3 CNC.

“We had already set our sights on another supplier, but became aware of Fooke through a partner company,” says board member Klaus Kleinsteuber.
A convincing argument for AWM was the fact that the machine could be installed without foundations. On a relatively small footprint, the large machining area allows five-sided machining of workpieces made from steel, cast iron and aluminium, with traverse paths of up to 3500 x 2500 x 1500 mm.
The Arnstadt-based company uses its new machine for the fine-finish machining of injection moulds in order to achieve the required surface quality and necessary dimensional and geometrical accuracy. Above all, however, AWM can also use the Endura 900 Linear Compact to expand its customer base in the 10-20 tonne tool servicing sector, as responses to its expanded range of services have already shown. This factor is associated with a further advantage: large tools do not have to be dismantled first and reassembled after maintenance, but can now be machined in one piece – an enormous time benefit.
“This gives us a unique selling point in the region,” concludes Kleinsteuber.
For further information https://phase3cnc.co.uk/

10,000th Haas

Ineos Team UK is the recipient of the 10,000th Haas machine tool installed in the UK. As one of the world’s largest manufacturers, Ineos has formed the team to challenge for the 36th America’s Cup, which will be held in New Zealand in 2021.

The Haas CNC Toolroom Mill will be in constant use at the team’s Portsmouth base, where it will be developing components for their first America’s Cup race boat, named ‘Britannia’. Once the boat’s development work has been completed, the Haas Toolroom Mill, together with a Haas Toolroom Lathe, will accompany the team to New Zealand for the event.
For further information www.haas.co.uk

Investment helps meet rise in demand

A substantial proportion of MJ Allen Group’s more than £30m turnover comes from gravity die casting and machining the aluminium main case, as well as the intermediate and cover castings, for a modified transmission that goes into the all-wheel-drive (AWD) version of the Ford Transit van.

Currently, 100 sets per week are delivered to Getrag Ford Transmissions in Halewood for assembly and export to a vehicle manufacturing plant in Turkey, but that number is predicted to double by the spring of this year.
To cope with the extra demand, the subcontract casting and machining specialist is building a second die-casting cell in Ashford, Kent, which is due to be operational imminently. Additionally, in September 2019 the company bought a second pair of Heller horizontal twin-pallet production centres to machine the increasing quantity of components.
Group managing director Tim Allen says: “We wanted a two-machine turnkey solution and a hand-holding approach with applications back-up, as this was the first significant automotive contract we had won and our initial entry into the machining of production volumes. That level of service was forthcoming from Heller UK’s Redditch headquarters and factory, and continues to this day.”
He adds that the first models were Heller MCI16s with an 800 x 630 x 630 mm machining envelope, whereas the two latest models, H4000s, have a larger 800 mm cube working volume and are manufactured in Redditch. One of each pair is devoted to producing the transmission’s main case in three operations, the longest cycle being one hour. The other two are able to machine both the intermediate and cover castings, four at a time per pallet in two operations apiece, as the cycle times are shorter.
For further information www.heller.biz