New from Victor CNC is the P76 three-axis vertical machining centre series. The P76 incorporates a 30-tool ATC that can change tools in 1.6 seconds with a chip-to-chip time of 4 seconds. This speed is supported by rapid feed rates of 48 m/min in the X and Y axes, and 32 m/min in Z.
The Victor P76 offers a work envelope of 760 x 500 x 510 mm, a BBT-40 face and taper contact spindle configuration and a meehanite structure with a wide base measuring 1166 mm that helps dampen vibration and add stability. Furthermore, maximum spindle speed is 12,000 rpm, underpinned by a spindle motor that generates 18.5 kW of power output.
Able to accept a maximum component weight of 500 kg on its 840 x 500 mm table, the P76 comes with a range of standard accessories, including a fully-enclosed splash guard, Fanuc 0i-MF CNC with 10.4” monitor, and a spindle oil cooler. Additionally, the P76 offers rigid taping, a three-step warning light, levelling pads, automatic power-off and a screw-type swarf-removal system.
For end-users looking for a higher-specification solution, optional extras include a 40-tool ATC, coolant gun, automatic tool-length measurement, automatic part measuring and a fourth/fifth-axis interface. For enhanced precision and higher-speed machining, the P76 can be configured with a 15,000 rpm spindle, linear scales, rotary table, through-spindle coolant and a Heidenhain TNC-620/640 CNC.
For further information
www.victorcnc.com