Widia is releasing the M1600 face mill for roughing to semi-finishing operations in steel, stainless steel, cast iron and nodular iron materials. With 16 cutting edges and a novel insert design, the M1600 performs in various machining conditions, including low-power machines, unstable set ups, long overhangs, weak machines or weak fixtures.

The precision-ground insert with a positive geometry enables low cutting forces and low power consumption, resulting in higher tool life and low cost per edge. Widia’s M1600 has one universal insert geometry in three versatile grades: WP35CM, WK15CM and WU20PM.

The WP35CM grade targets all types of steels, while the WK15CM grade is for cast-iron materials and performs best in dry applications, but can also be used wet. The universal WU20PM grade is for the machining of steel, stainless steel and high-temperature alloys in both dry and wet applications.

Notably, the ‘smart’ insert design features a seating surface below the cutting edge that promotes smooth chip flow and reduces cutting forces on the tool. The insert also has a curved cutting edge and is axially positive, resulting in reduced power consumption. These key design features, coupled with 16 cutting edges, make M1600 an economical face milling option.

M1600 face mills are available in six metric diameter ranges between 50 and 160 mm. Inch diameters will follow shortly. Orders for the M1600 bodies and inserts, as well as other Widia tooling, can be placed through Widia’s authorised distribution partners.

For further information
www.widia.com