UK NEWS

XYZ Machine Tools helps to keep vans safe

Exeter-based Van Guard Accessories has invested in a new XYZ 750 TMC vertical machining centre with ProtoTRAK RMX control and 20-station carousel tool changer. The machine enabled this progressive manufacturing business to bring in-house the manufacture of prismatic parts for its ULTI Lock hook-lock, which is the first ‘Sold Secure’Gold level hook-lock for vans.

The first part on the new machine was the lock’s face plate. Fixturing was designed so that 22 face plates could fit on onepallet. Previously, countersinking of the face plates to three different depths took place manually, requiring 15 minutes per part. To subcontract this operation cost £1.10 per component, so in-house machining was easy to justify with a cycle time of 30 seconds per plate and a payback on the machine of less than three years.

Director of operationsLeigh Andrewssays: “The ULTI Lock has been a raging success; we’re making between 4000 and 6000 per month. Typically, each van will have two or three hook-locks, one on the rear door and two on the side door. We’re preparing more fixtures so that we can introduce the machining of other parts in-house. Currently we’re only using 50% of the XYZ 750 TMC’s capacity, so we have plenty of machining time available for different parts. Furthermore, with the machine’s swarf conveyor, we’re able to recover more money from recycling the swarf while at the same time maintaining a clean machine and clean coolant.”

Van Guard chose the XYZ 750 TMC as Leigh Andrews had experience of the machines at a previous company.

“Although we’re new to CNC machining, the graphics and ease of use of ProtoTRAK made the crossover from manual to CNC machining easy,” he concludes.

For further information www.xyzmachinetools.com

VISITORS FLOCK TO SOUTHERN MANUFACTURING

The 26th edition of Southern Manufacturing & Electronics concluded earlier this month at the Farnborough International Exhibition Centre. Attracting over 460 exhibitors, the show set out a plethora of manufacturing solutions, including many in live demonstrations, for its highly engaged visitors.

XYZ Machine Tools (www.xyzmachinetools.com), for example, performed live cutting demonstrations on seven machines, including the company’srecently introduced TMC toolroom machines for low-to-medium volume and tool-making applications. These machines, which use the same platform and linear rails as XYZ’s established LR VMC range,leverage the easy-to-use ProtoTRAK control for the rapid programming and set-up of 1-off and small-to-medium batches.

As well as two TMC machines and the RMX 2-OP second-operation machine, XYZ also demonstrated its the XYZ 800 HD vertical machining centre with Siemens 828D control and ShopMill.In addition, visitors to the stand could see the XYZ ProTurn RLX 355, a solution for low-to-medium volumes.Featuring the ProtoTRAK control, it is a fast way of getting parts cut in a machine that offers 1000mm between centres. For more component, the XYZ CT 52 LR turning centreon showprovides 52mm bar capacity, linear rail technology and a Siemens 828D control.

Elsewhere at the event, MACH Machine Tools (www.machmt.co.uk) showcased two DynaPath-controlled milling machines, including a new three-axis model. The MACH MDT-1 turret-type mill, one of the company’s best-selling models, shared centre stage with a new MDV 800 three-axis CNC vertical machining centre that only recently made its UK debut at the company’s open house in January.

While the MDT-1 turret-type mill, with its rigid design and build, powerful spindle and good-sized working envelope offered obvious appeal to visitors, large and small, it was the new production-oriented MACH MDV 800 vertical machining centre that pulled in the crowds.

The new MDV-series, comprising the MDV 800 and MDV 1100 machines, is a high-performance range of machining centres that MACH Machine Tools says delivers excellent cutting performance and improved process efficiencies. In addition to the DynaPath WinDelta CNC control, the machines feature a BT 40 air-cooled, high-torque (11-15 kW) 8000 rpm spindles as standard.

Mills CNC (www.millscnc.co.uk) provided visitors with a display of two new machine tools from DN Solutions. The compact DVF 4000is the latest addition to Mills’ best-selling DVFseries of five-axis simultaneous machining centres, providing component manufacturers with a ‘one-hit’ machining solution.The machine features an 18.5kW/12,000rpm (BT 40) directly-coupled spindle as standard, and a 400mm diameter, built-in rotary, tilting table with a zero-backlash roller gear cam design for improved process reliability.A 60-tool servo-driven ATC and integrated thermal compensation deliver increased productivity and part accuracies, and roller LM guideways ensure fast processing speeds.

Also on the Mills CNC stand and continuing the one-hit machining theme was a Lynx 2100LSYB multi-tasking turning centre.This 8” chuck/65mm bar capacity Lynx 2100LSYB is a productive multi-tasking turning centre equipped with a 5” chuck, 6000rpm sub-spindle, a Yaxis (±52.5mm) and driven tooling capabilities (6000rpm).

Another supplier keen to show its solutions for one-hit machining was Matsuura (www.matsuura.co.uk). Following the success of its MX-330 PC10, Matsuura has introduced the MX-420 PC10 five-axis VMC configured with 10 pallets and 90 tools for larger workpiece machining. A fully automated MX-420 PC10 made its debut UK appearance at Southern Manufacturing, machining live throughout the show and demonstrating just how flexible the 10-pallet changer can be during unmanned operation.

From a tooling perspective, Industrial Tooling Corporation (ITC, www.itc-ltd.co.uk) presented its latest product lines and introduced its new e-commerce platform.The online portal provides enhanced accessibility to the company’s exponentially growing product lines. This informative and easy-to-navigate e-commerce platform allows manufacturers to create an account and place orders, browse through stock and see everything ITC has to offer, including from partners such as Widia, Big Kaiser, Kemmler and Bass.

Exhibition visitors seeking out the latest software solutions found CGTech (www.cgtech.co.uk)shining the spotlight on its latest Vericut CNC simulation software. Vericut is now in use at over 7000 companies in more than 60 countries, simulating machining and correcting errors to eradicate potential crashes prior to actual cutting. The latest version, Vericut 9.4, focuses on increased connectivity between the actual machine and the virtual simulation.

With the machining process complete, attention of course turns to measurement and inspection, with a plethora of solutions on display at Southern Manufacturing. The Mantis 3rd generation stereo microscope from Vision Engineering (www.visioneng.com), for example, attracted plenty of attention. Building on the original award-winning Mantis design, the company says that the latest additions to the range deliver superior image quality, expanded field of view and an integrated digital camera for maximum efficiency when capturing, reporting and analysing.

Many other metrology companies offering metrology equipment or services were present at the show. Aberlink (www.aberlink.com), for example, demonstratedits Fulcrum manual CMM with a particularly simple user interface. The company says it can start measuring parts within minutes of being switched on, even if the operator has no previous experience.

Keyence (www.keyence.co.uk), which is known for its sensors, 3D imaging, machine vision, microscopes and metrology systems, showed its latest VHX-7000N digital microscope with 4K resolution, while another metrology specialist, LK (www.lkmetrology.com), launched a high-accuracy CMM and demonstrated its Freedomindex table. The latter is said to speed component inspection by up to 40% when using a portable, multi-axis measuring arm.

The next Southern Manufacturing & Electronics exhibition will take place under the auspices of Easyfairs, which in January acquired the show from European Trade & Exhibition Services.

Matt Benyon, group CEO of Easyfairs, says: “Southern Manufacturing & Electronics is a perfect strategic fit for our growing portfolio.As part of an established stable of industry-leading events, the event’s future development and its loyal exhibitor and visitor base, which has been built up over the past 30 years, will be in very safe hands.”

For further information www.industrysouth.co.uk

EOS joins MTC

Additive manufacturing (AM) specialist EOS has joined The MTC (Manufacturing Technology Centre) as a tier 3 member, marking a significant step in strengthening the collaboration between the two companies. EOS’ new membership will also extend the MTC’s range of AM options for defence, power and energy customers with the addition of an EOS M 290 equipped with EOSTATE Exposure OT in-process melt pool monitoring. This acquisition will enable the research technology organisation to develop more advanced materials for use in AM and expand its range of applications.

For further information www.the-mtc.org

Rcapital buys FGP Group

Private investor Rcapital has completed the acquisition of aerospace and defence engineering business, FGP Group. The deal will protect over 200 jobs in Dorset. FGP Group comprises Weymouth-based FGP Systems Ltd, a precision engineering business which provides tight-tolerance machining, turning and fabrication services to blue-chip aerospace and defence customers, and FGP Lufton Ltd, which is based in Yeovil and manufactures a portfolio of parts for the aerospace sector. The group also includes a successful surface treatment and coating business, Ramp Surface Coatings.

For further information www.rcapital.co.uk

AWI achieves record-breaking year

Export successes, security of supply and making every member of the business a shareholder were just some of the highlights of a record-breaking year for Alloy Wire International (AWI). This manufacturer of round, flat and profile wire has delivered £17.9m of sales since the MBO 12 months ago, a near £5m rise on the same period in 2022 and £3m above anticipated revenues. The senior management team puts the expansion down to a resurgence in the oil and gas industry and aerospace volumes returning post-pandemic, plus ongoing growth in automotive and new opportunities in R&D and space exploration.

For further information www.alloywire.com