Robot aids 3D printing of boat hull

A robot cell installed by CNC Robotics at Autodesk’s Advanced Design & Manufacturing Facility in Birmingham has been busy producing part of the hull for a 3D-printed boat. With a striking design that includes wave-inspired sides and a fin-like form that tapers toward the stern, MAMBO (motor additive manufacturing boat) is a boat like no other, both in its distinctive looks and its use of fibre-reinforced plastic by 3D printing.

Milan-based Moi Composites collaborated on the design of the boat with Autodesk, which provided its Fusion 360 and Netfabb software. Construction of various hull sections took place in both Birmingham and Milan using continuous-fibre manufacturing with robots on both sites. The 3D printing process gives greater durability and performance, while also saving material.

For further information www.cncrobotics.co.uk

KMF continues to invest

Precision engineering firm KMF has invested in a significant piece of machinery that will double critical capacity. Resulting from an anticipated increase in demand post COVID-19, the group has purchased a second Yamazaki Mazak Quick Turn 250MSY to complement its suite of Mazak equipment. Adding to the facility’s capacity means KMF Group can further support its clients in the aerospace, instrumentation, scientific and medical industries.

Keith Nicholl, commercial director at KMF Group says: “The machine is co-located with an existing Quick Turn 250MSY, effectively doubling our capacity so we can respond to increased demands from new and existing customers. Both machines link to our offline programming capability, resulting in high levels of cutting efficiency, 24 hours a day, seven days per week.

“COVID-19 impacted many businesses, but as we emerge from the worst of the crisis, we’ve positioning ourselves to ensure that we’re fully prepared to support customers across various sectors with immediate effect,” he adds. “By investing now, and being business-ready, we can proactively support our customers with their own revival.”

The Quick Turn 250MSY has a 500 mm bed capacity, and is equipped with a 10” chuck on the main spindle and a 6” chuck on the secondary spindle, handling part sizes up to 380 mm. A Hydrafeed Multifeed magazine barfeed enables unmanned running of small-to-medium batch quantities.

Neil Coggins, area sales manager at Yamazaki Mazak UK, says: “As production begins to increase across multiple industries following the disruption caused by the pandemic, it’s vital that subcontractors have the engineering capacity to hit the ground running.”

For further information
www.kmf.co.uk

Parker gets a grip on automation

As a $14bn corporation, the journey of Parker Hannifin started over 100 years ago when Arthur Parker founded the Parker Appliance Company back in 1917 from a loft with business partner Carl Klamm. Through the generations, the company has moved from pneumatic brake systems for trucks, trains and buses to aerospace systems and technology, air preparation and dryers, EMI shielding, filters, separators and purifiers, fittings, couplings, and much more.

With dozens of divisions, brands and a global reach, Parker Hannifin is today a world leader in motion and control technologies. At its Sheffield site, which manufactures cryogenic valves, the company recently installed a machining cell with Hainbuch work-holding equipment at the heart of the investment.

Commenting upon the product range manufactured at the site, Parker Hannifin’s Lloyd Cooper says: “The products we produce are high in diversity and low in volume; we probably have about 20,000 part numbers at the top level, so high diversity and low volume is what we do. This allows customers to order what they want and our USP is the ability to service that request. As a result, we create a lot of demand on our machine shop with regard to set ups, as we may be running a batch of 3- or 4-off before we move to the next product. This means we incur a lot of set-up times and we’ve been looking at the ratio of ‘set up to run’ times. There may be a 45-minute set up for a 10 or 15-minute production cycle. These numbers didn’t stack up and here at Parker we have a really keen focus on lean manufacturing.”

To streamline production Parker Hannifin has invested around $500,000 in an automation cell to combat excessive set-up times in the turning department.

“We had three machines that were fully depreciated, and wanted to remove those and create one comprehensive machine and cell,” explains Cooper. “We really looked at how we could make it a complete cell.”

The new production cell incorporates a Hydrafeed MV65 bar-feeding system which serves a DMG Mori NLX2000/500 CNC turning centre. Component unloading is via an ABB Flexloader robot system.

“We looked from a cradle-to-grave perspective on how we could make it a true cell, and this is where the ABB Flexloader helps us to do unmanned loading, unloading, deburring and clean down. One of the crucial solutions in this cell is the Hainbuch hydraulic chuck system. As a high-mix business, what Hainbuch has allowed us to do is switch from one collet size to another in 30 seconds, or even change from a collet to a jaw configuration in 2 to 3 minutes. Previously, this could have taken 45 minutes. It’s a ‘night and day’ difference to our business, and while it may be a considerable investment, the savings we’re making in efficiency will make this a sub-two-year payback.”

With regards to the Hainbuch work-holding system, Cooper says: “The work holding has probably been the singular reason as to why we wanted to do this project. We wanted something that would compress our set-up times, as we were incurring many, many set ups every hour. Hainbuch did that with an off-the-shelf solution and no additional requirement from an engineering perspective. The quick-change aspect of it is astounding. Providing the ability to change from collet size to collet size in 30 seconds is really impressive, and we have even had some changeovers in 15 seconds. This can give us a door-open to door-close time of less than a minute.”

Alluding to the installation, Hainbuch UK’s managing director Nick Peter says: “We worked with Parker and the machine-tool builder to provide a quick-change work-holding solution. The parts are many and varied, with different shapes and valve bodies that include some hexagonal and some round parts from different materials. Parker wanted to swap over from collet chucks to three-jaw chucks very quickly to improve the process, as the previous situation increased the cost per part.”

With four-jaw modules on the machine, as well as collets and three-jaw chucks, Hainbuch looked further into the request, as Peter continues: “We initially didn’t know why this customer would want two chucks with two spindles, and then also want four three-jaw modules, but it was all about saving time. This configuration allows Parker to set up three-jaw chucks off-the-machine for a particular part on both spindles if necessary. The result is that collet chucks can come straight off the machine with three-jaw chucks ready to swap over, giving a changeover time of fewer than two minutes. By having the extra chucks, the subsequent set up can take place while the machine is running, compressing non-cutting times even further.

“Now, Parker can change from one collet chuck to another in a matter of seconds, whereas changing from a collet configuration to a chuck set-up takes just a couple of minutes,” adds Peter. “Taking a jaw module off is literally just a task of undoing three bolts and fastening another jaw module straight on to the existing collet chuck. There is no need to accurately position the three-jaw chuck as it follows the collet and there is a zero-point system already on the three-jaw, so accuracy is maintained to a couple of microns with exceptional clamping forces.”

Concludes Cooper: “As a business, we look at automation and may be afraid of the complexity of it, but this has been a very smooth process. Moreover, when you consider a payback of fewer than two years, automation should be a formality for UK manufacturing businesses. We will pass on these savings to our customers, which is a credit to this cell and its ability to produce parts 80, 90 or even 100% quicker than previously. In short, we can enable our customers to become more competitive while we retain the broad product offering that we’ve always had from our Sheffield facility. This has been a real game-changer with regard to customer success and that is what we’re striving for.”

For further information
www.hainbuch.com

Transmission specialist selects EMAG

Solutions for the demanding production of transmission components: this statement sums up the task required of Kordel, headquartered in Dülmen near Münster. The company develops and produces complete transmission systems used in industrial trucks, as well as agricultural and construction machinery. To ensure that its technology can withstand tough, long-term continuous use, while at the same time ensuring efficient power transmission, the specialist manufacturer relies on high-quality, precision machine tools for its production.

For over 20 years, Kordel has been using pick-up technology from EMAG (the company currently operates 17 EMAG machines), and it continuously invests in new models from the German manufacturer. Most recently, the company purchased two VLC 200 GT turn-grind centres. These systems perform hard machining processes on a variety of bevel gears, one after the other, in a single set-up.

The result: by combining turning and grinding, this solution ensures long tool life and a qualitatively stable process.

One of the two machines is located at the Dernekamp site near its headquarters, while the other is in Jawor, Poland. In Germany, the VLC 200 GT manufactures a variety of different sized bevel gears, used in a one-wheel drive for industrial trucks. This gear is one of the central parts of the drive and requires an enormous amount of precision.

After hard turning, only a residual allowance of a few hundredths of a millimetre remains on the gear. The subsequent grinding of inner and outer contours – with the corresponding two grinding spindles inside the VLC 200 GT – creates a consistent surface quality that ensures a stable production process.

For further information
www.emag.com

AWI promotes trio to board of directors

A UK manufacturer of round, flat and profile wire has strengthened its senior management team (SMT) with three key appointments. Alloy Wire International, which celebrates 75 years of manufacturing in 2021, has promoted Tom Mander, Andrew Du Plessis and Adam Shaw as managing director designate, technical director and finance director, respectively. The trio will work with the current SMT to help the company in its next stage of development as it looks to maximise a £3m investment in material, drawing machines, spooling equipment and office/factory improvements.

For further information www.alloywire.com