LVD is introducing Taurus FL, a new large-format gantry-style fibre laser cutter that offers extra-large sheet metal cutting capacity. Of modular design, machine size begins at a bed length of 12 m, expanding in increments of 2 m to a maximum of 40 m. This large format allows the cutting and nesting of a diverse range of parts. It is possible to process workpieces up to 3.3 m wide and up to 30 mm thick.

The production of large parts takes place without repositioning, while users can position multiple smaller workpieces on the cutting table for processing in continuous fashion, without interruption. Operators are able to cut parts on one section of the table, while loading/offloading takes place on another, keeping downtime to an absolute minimum.

Taurus FL offers easy access. Only the gantry features an enclosure, not the complete machine. The mechanical design and drive system ensure high machine dynamics in large-format cutting.

Machine operators have the use of two touch panels for convenient access to the control at all times. A handheld control unit enables the user to safely move all axes in manual mode for machine set up, or to load the nozzle changer. A camera located inside the cutting zone and a monitor on the operator console allow continuous monitoring of the cutting process. The cutting zone has a detachable front panel, providing access for maintenance.

Taurus FL also provides the option of bevel cutting or 2.5D cutting up to 45°. The bevel head uses two direct-drive motors. With direct drives there are no transmission components, resulting in high accuracy and rapid-response motion.

For further information
www.lvdgroup.com