NEW PRESERVATION LINE IMPROVES CUSTOMER SUPPORT, OPTIMISES PROCESSES AND INCREASES RESOURCE EFFICIENCY

In order to meet customer demands faster and more efficiently, the Carl Spaeter Hamburg company expanded its range of manufacturing equipment with a Rösler KON 34/6-HD preservation line that combines shot blasting and painting in a single system. It is designed to handle steel components up to 3200 mm wide, 400 mm high and 21.2 m long.

The line is equipped with two paint systems. Perfectly integrated into an already existing building containing an overhead crane, the new preservation line allows not only a higher material throughput but also improves the entire production flow resulting in shorter lead

times.

Founded in 1905 as hardware store, the Carl Spaeter Hamburg company became one of the leading steel suppliers for retailers, mechanical contractors and industrial manufacturers in northern Germany and beyond. The company’s success is based on a broad line of steel products with an inventory of more than 25,000 tonnes, short delivery times, high operational flexibility and numerous steel processing and refinement services.

Mike Barz, general manager at Carl Spaeter Hamburg, says: “Since our existing shot blast and painting line had reached the end of its useful life, and because we wanted to improve our customer support, we purchased the KON 34/6-HD from Rösler.”

The equipment supplier won this substantial purchase order against two competitors, firstly because Rösler adapted its equipment concept to the customer’s requirements. At the same time the customer was impressed by the quality and sturdy equipment design and Rösler could show several reference plants in the field.

Reyk Hagelberg, plant manager at Carl Spaeter Hamburg, says: “Within a very short time period Rösler, with input from us, developed a viable equipment concept that was perfectly adapted to our existing building and our technical requirements.”

A critical customer demand was that the line must be able to handle steel components, up

to 3200 mm wide, 400 mm high and 21.2 m long. Moreover, Rösler had to make sure it was possible to shot blast steel plates with a thickness of 4 mm with the same high-quality cleaning results as plates with a thickness of 100 mm. An additional requirement was the perfect blasting and painting of all surface areas and steel beam edges. Since the steel components have a maximum weight of 12 tonnes, the design of the roller conveyors and cross transport systems had to be extra sturdy.

Special sensors measure the height of the steel components (also width in the case of steel plates). These sensors sit on inlet roller conveyor of the preservation line. The PLC then automatically determines how many turbines require turning on to clean the respective components. Other parameters like travel speed, paint type and paint thickness are also part of the processing programs, which reside in the PLC ready for calling up from the operating panel.

In a first step the steel components pass through a pre-heater that prevents moisture from carrying into the shot blast machine. The system guides exhaust air from the pre-heater to the paint drier, which helps to reduce the drying time of the applied paint.

From the pre-heater, workpieces transfer to the shot blast machine. The machine housing is made from manganese steel. In addition, the blast chamber is lined with overlapping liners made from manganese steel. Eight high-performance Gamma 400G turbines, each with a drive power of 22 kW, ensure that the specified cleanliness of SA 2.5 is consistently and safely achieved at a travel speed of up to 4 m/min. Compared with conventional blast wheels, the Gamma turbines with curved throwing blades in ‘Y’ design achieve up to 20 % higher blast performance and, at the same time, reduce energy consumption, reports Rösler. Residual blast media and dust on the shot blasted components is removed with a combined brush-off/blow-off system at the exit of the blast chamber.

To meet individual customer requirements for the coating operation utilising a water-based

primer, the integrated automated spraying equipment features two independent paint application systems. Prior to the paint process, special sensors precisely measure the

workpiece dimensions – down to the last millimetre.

The gantry holding the spray guns is then programmed for these measurements, ensuring that the primer is only applied to the surface of the respective steel components. The result is a minimum of overspray and the prevention of unnecessary waste of the valuable resource paint. The paint filter with air extraction points on both sides of the transport system collects any residual paint overspray.

The filter is extremely effective: the residual dust load in the clean air is only 0.2 mg/m3

and, therefore, considerably below the official standard specifying a maximum of 1 to 2

mg/m3. Notably, the residual dust in the clean air coming from the dust collector of the shot blast machine amounts to 1 mg/m3, well below the legal limit of 3 mg/m3.

“With the new Rösler preservation line we can run our surface treatment operations for steel plates, beams, pipes/tubes and steel bars not only with an excellent finishing quality but also in a highly eco-friendly manner,” says Hagelberg.

Heating the paint drier with exhaust air from the pre-heating system is a further contributor towards resource-saving operations.

The workpiece transport system of the new preservation line was integrated into a building with an existing overhead crane at Carl Spaeter. The roller conveyors with forward and

reverse transport direction cover all four building bays with an area of over 42,000 sq m. This arrangement guarantees a highly flexible material handling operation.

For example, it allows the transport of steel components from anywhere in the building to

the preservation line, to other areas in the building or to the truck load station. The cross-

transport systems, placed to the left and right of the roller conveyor, offer plenty of capacity

for the intermediate storage of steel components.

“With the new preservation line and the resulting further steel processing and refinement possibilities we can fulfil customer requests faster and more efficiently,” says Barz. “This helps to reduce our lead times. In addition, the new line, in combination with the roller conveyors and cross-transport systems, improves our logistical set-up with shorter walking distances for our employees and streamlines our entire workflow.”

For further information www.rosler.com

Investment at Britten-Norman

Britten-Norman has secured new investment from a group of investors led by 4D Capital Partners LLP, a private equity firm that focuses on operational improvement and business transformation. The new investors are making funds available to Britten-Norman to fund working capital and drive successful long-term growth. Britten-Norman is the manufacturer of the Islander, which the company says is the world’s most iconic commercial light twin aircraft. In 2024, the business will be celebrating 70 years since it was first established at Bembridge Airport on the Isle of Wight, UK.

For further information www.britten-norman.com

Worker shortage led automation decisions

New data from global automation market platform HowToRobot reveals the most common business reasons for automating last year. Some 80% of all projects measured aimed to free employees from manual tasks and move them to more value-adding activities, HowToRobot finds. The data confirms that businesses are seeing automation and robots as a supplement to – and not a replacement for – human labour. The second biggest motivation for automating in 2023 was to increase productivity, with 70.9% of projects having this goal, while 36.2% of projects sought to improve product quality and uniformity.

For further information www.howtorobot.com

GE Aerospace to make €64m investment

GE Aerospace plans to invest more than €64m in its manufacturing facilities across Europe this year, a move that will help the company produce more efficient commercial and military engines. Many of the investments enable new manufacturing techniques or materials that result in stronger and lighter components, increasing the efficiency of engines and reducing emissions. Sites in Italy, the Czech Republic, Italy, Poland and the UK will benefit. Specifically, the plant in Gloucester, UK, will receive £1.6m for new machines, additional tooling and safety enhancements. 

For further information www.geaerospace.com

JLR to recruit 250 electrification jobs

JLR is recruiting 250 electrification engineers to work at its Gaydon and Whitley facilities. The roles will further propel the development of JLR’s next-generation 100% electric vehicles launching by 2030 under the company’s ‘Reimagine’ strategy. Within the 250 new roles, the car manufacturer is specifically recruiting over 40 battery engineering roles, working across disciplines that include advanced energy storage systems, battery cell design and cell stack assemblies.

The remaining roles span specialisms in propulsion, including propulsion software, calibration and controls, HV system integration, electrical system component design and more. Aspects of the roles will also focus on improving fast-charging experiences for JLR clients.

For further information www.jaguarlandrover.com