Components are becoming more and more complex, and drawing tolerances ever-tighter. The ability of a CNC turn-mill centre’s live turret tooling to move in the Y axis, as well as in X and Z, has therefore become increasingly important to facilitate high accuracy, one-hit machining. If travel in only the latter two axes is available, the milling of flats, deburring, and the possibility of machining pockets and off-centre features in-cycle, are either difficult or impossible.

The latest Miyano fixed-head lathe from Citizen Machinery UK to feature a Y-axis turret, in this case with all 12 tool stations driven, is the new BND-64SY for turning parts from bar up to 64 mm diameter. Joining a similar model that accepts bar up to 51 mm diameter through the main spindle, the 4.75-tonne machine is a mid-range, multi-purpose, twin-spindle turning centre. A ribbed monobloc bed slanted at 30°, and carrying precision-scraped square guideways, provides high rigidity, optimal thermal and mechanical stability, and excellent vibration damping, says Citizen.

These characteristics result in highly accurate machined components and longer service life of the tools, which can mount flexibly in the turret using multi-tool holders in any position. The robustness of machine construction allows the turning and milling of tough alloys and metals in their hardened condition, even when taking intermittent cuts. Polygon turning and thread milling are both options in the FANUC 0i-TD control, which is capable of simultaneous four-axis interpolation.

The specification of the Japanese-built machine includes turret travels in X/Y/Z of 175/75/435 mm, some 530 mm of sub-spindle axis travel, and up to 20 m/min rapid feed rate.

For further information
www.citizenmachinery.co.uk

The latest innovation from Tornos to support its sliding-head lathe customers is the pneumatic unloading system for the Swiss DT26 machine series. This new system avoids damage to any particularly intricate or fragile workpiece features.

For long workpieces with delicate features such as a fragile thread, the standard long-part system on Swiss DT and Swiss GT sliding-head machines may not provide the careful part handling required by the end user. For such types of workpieces, with a diameter up to 24 mm and a maximum length of 260 mm, Tornos now has a solution that enables delicate part removal.

Mounted on the tooling block for back machining, the system does not impair the possibility of using T510 and T520 tools. Ejection is via pneumatic operation, by using clamping jaws adapted to the respective workpiece type and material, ensuring there is no potential for part damage. 3D printing can facilitate jaw manufacturing, allowing complete customisation to the component form.

As a point of note, the system is equipped with sensors to monitor machine movements and provide optimum protection of the device. Furthermore, the design is such that it avoids interference with the machine’s counter-spindle.

With the addition of this system it is possible to keep a machine up to date and in conformance with customer component requirements, while employing only minor modifications. Tornos says that the retrofitting of existing machines is straightforward.

For further information
www.tornos.com