Aircraft component manufacturer, Globe Engineering, has installed a fourth Unison all-electric CNC tube-bending machine at its facility in Wichita, USA.

The new machine has joined Globe’s existing Unison all-electric tube benders and will help to increase manufacturing capability. With overlapping capacities, the Unison tube bending machines at Globe can bend tubes from 1.25” (31.75 mm) to 6.00” (152.4 mm) in diameter.
In addition to supporting Globe’s ongoing requirements for bending quality aircraft tubing, the latest all-electric CNC tube bender from Unison will be used to bend a range of aluminium, stainless steel and titanium tubes measuring up to 1.25” (31.75 mm).
“We aren’t just creating new capability by buying a new Unison tube bending machine, we’re creating capacity and a safety net, in case we have a breakdown,” explains bend shop supervisor Shaun Knuth.
Describing some of the key advantages that Unison all-electric tube benders have over hydraulic tube benders, he adds: “They’re more efficient because they use less energy. In fact, they only use energy while they are in motion. By comparison, hydraulic benders use electricity all the time they are running, with their energy usage increasing during cycle time. Electric machines are much quieter too, and offer greater repeatability. You simply select the exact pressure required; if you want 1,272 psi (87.7 bar) of pressure, just type that in and the machine creates the exact same pressure every time.”
Knuth also praises the fact that Unison all-electric tube benders can be operated more slowly when hot-bending titanium, all the way down to a creep – a process that removes the risk of overheating and minimises scrap.
For further information http://unisonltd.com/

KMF has purchased a new P4lean-2516 Salvagnini panel bender (P4L) that uses 60% less electricity, saving the company an estimated £8000 a year.

Several upgrades are featured, including CLA-SIM auxiliary blade command, MAC 2.0 to calculate suitable bending trajectories and a patented bending formula which will automatically adjust a bend to any mechanical or thermal deformation. The machine complements an existing P4-2516 panel bender from Salvagnini that has provided more than 78,000 hours of working time for KMF to date.
The P4-2516 required 600 litres of oil, but new P4L machines use electronic actuators with only 13 litres of oil in total. All current P4L machines use touch-screen controls running on a Windows 10 platform. Moreover, the panel bending system is Industry 4.0-embedded, including the service support option of 24-hour machine monitoring to ensure all systems are working within tolerance.
“To provide an idea of efficiency and productivity levels on our panel bender, it is currently around 80%,” explains Pete Krynicki, programming and folding technician at KMF.
The Salvagnini machine can manufacture metal panels up to a maximum of 2500 mm long and form bends up to 165 mm high. A favoured feature is the panel bender’s interactive graphics programming, which will significantly decrease the task of KMF programmers with its intuitive programming and 3D simulation of different bending phases. The new panel bender also offers automatic tool changing and the ability to switch from one operation to another in a few seconds.
“As a metal fabrication subcontractor, being able to complete small and large batches without manual tool changes will significantly improve our speed of processing and flexibility,” adds Krynicki. “We also appreciate the personalised service, training and support on the panel benders that we get from Salvagnini – it is a real partnership.”
For further information www.salvagninigroup.com

One of the world’s most famous manufacturers of guarding for machinery, Procter Machine Safety, is benefiting from the performance and quality attributes of a newly installed Trumpf TruBend 5130 CNC press brake.

The machine has been acquired to increase bending capacity at the company’s 100-employee Caerphilly manufacturing plant, where it has been joined by Trumpf’s TruTops Boost programming software.
“To be honest, we assumed that Trumpf machines would be too expensive, so we initially discounted them for that reason,” says John Procter, the company’s director of machine safety. “Nevertheless, we arranged a visit and were not only impressed with the press brakes on offer, but the prices were cheaper than we envisaged.”
The TruBend 5130 offers features such as lower tool displacement and five-axis back-gauge functionality. Since installation, the machine has been set to work producing parts for machine guards made from mild steel, aluminium and stainless steel, typically from 1 to 5 mm in thickness. Many of the parts are made to order, so are either 1-offs or low in batch size.
“We like the bending aid,” states Procter. “This helps with lifting and has allowed us to increase efficiencies due to less man-hours being required on any given job. Ultimately we have been able to cut shifts by up to half. In addition, thanks to the capabilities of the Trumpf TruBend 5130, we can now bend parts that were previously not possible.”
In terms of tangible savings, the press brake has made a positive contribution to the company’s bottom line. “I would estimate that the machine is around 15% faster than our existing press brake capacity,” explains Procter. “In addition, we are enjoying labour cost savings, as well as benefiting from less human error, which in turn means reduced scrap.”
For further information www.trumpf.com