Vargus UK has introduced the new ST-Cut line of cutting tools for small part machining. Developed specifically for the turning of small components on Swiss-type sliding-head turning machines, the ST-Cut line presents a solution for virtually every small part turning application.

The ST-Cut series features a novel insert replacement system that provides fast and easy changeovers of tips from both sides of the tool. This capability is particularly suitable for manufacturers running sliding-head turning centres where space is often limited inside the working envelope.

Furthermore, the clamping system demonstrates high repeatability and rigidity for manufacturers aiming to part-off a maximum diameter of 17 mm.

The ST-Cut series incorporates both left- and right-hand inserts with a cutting width from 0.5 to 2 mm, with a range of cutting depths, geometries and insert grades. Similarly, the square grooving/turn and round grooving line offers left- and right-hand variants with insert widths from 0.5 to 3 mm, while the round groove inserts provide a choice of radii from 0.2, 0.5, 0.75, 1, 1.25 and 1.5 mm. From a threading perspective, the left and right-hand inserts are available with a 55° and 60° profile option, offering a maximum insert width of up to 3.2 mm.

ST-Cut inserts are available in two grades, including the AlTiN PVD coated VPG grade for achieving medium to high cutting speeds on alloy steel, stainless and titanium alloys. The uncoated VS020 sub-micro grade is suitable for medium to low cutting speeds. This grade is uncoated to ensure a sharper cutting edge that is crucial for very small components where accuracy is paramount.

For further information
www.vargusuk.co.uk

Guhring has expanded its hole-making and threading range with the arrival of the MTMH3-Z. An expansion of the Drifter series of thread mills, the new MTMH3-Z Drifter helical-drilling thread mill demonstrates high performance levels when processing materials up to 66 HRc.

Combining core drilling and threading in a single operation, the MTMH3-Z Drifter helical-drilling thread mill offers process reliability when wet- or dry-cutting all material types. With two oil grooves on the shaft to provide optimum cooling with cutting fluid or air, the range also has a left-hand cutting geometry that stabilises performance during climb milling. A fine-grained carbide composition characterised by its high hardness complements this geometry and makes the tool suitable for hard machining.

Guhring’s temperature-resistant TiSiN coating prolongs tool life and performance. Furthermore, the MTMH3-Z Drifter incorporates a special face geometry with hollow grinding that makes process-safe core-hole drilling and thread milling possible in almost all material types.

With a shank diameter from 3 to 12 mm and a neck relief from 5 to 40 mm, the new thread milling series is suitable for creating threads from M2 to M16 on a material range that includes all steels and stainless steel, cast and graphite iron, aluminium, and titanium alloys. Suitable for drilling and threading holes up to 2.5xD in a single operation, the MTMH3-Z Drifter can reduce set-ups, cycle times, tool inventory and costs.

CNC Guhro thread-mill software enables users to specify the thread data by selecting from all current thread standards and then inputting the material requiring machining. At this stage, the software provides the optimal parameters.

For further information
www.guhring.co.uk