The new MaxiMill 275 milling system from Ceratizit suits the rough machining of high-alloy stainless and refractory steels, materials often found in the manufacture of turbocharger housings and exhaust manifolds. Ceratizit’s MaxiMill 275 face milling system is suitable for processing flat surfaces on these components. The tool is robust in its construction and design, with a maximum number of indexable inserts for efficient machining. Inserts are ground all around to ensure a smooth milling action, high-quality surfaces, long tool life and high efficiency.

The face milling of turbocharger components presents huge challenges for cutting tools due to the demanding nature of the material – often refractory cast steel containing niobium. In addition, the features of turbocharger housings and exhaust manifolds frequently create insecure machining conditions, bringing a requirement for tool stability so that it cuts effectively and achieves the necessary quality.

“Our development team began the process by designing the cutter body to be extremely stable and have low vibration,” says Detlef Erdei, application manager automotive at Ceratizit. “We were then able to optimise the number of cutting edges based on the diameter.”

This work resulted in the largest MaxiMill 275 with 125 mm diameter featuring 18 teeth, while the smaller 63, 80 and 100 mm diameter variants have 7, 10 and 14 teeth respectively.

The Ceratizit development team paid particular attention to the accuracy of the insert seat, which keeps the indexable insert firmly and precisely in place using a wedge clamp.

Ceratizit’s indexable inserts have also been refined thanks to the use of a special cutting material for the highest thermo-mechanical demands. Furthermore, a positive geometry with a 20° rake angle enables the inserts to cut effectively and guarantee a smooth machining action.

For further information
www.ceratizit.com

Kennametal has introduced its HiPACS drilling and countersinking system for aerospace fastener holes. Designed to drill and chamfer holes in one operation, the high-precision tool meets the aerospace industry’s stringent accuracy requirements, while delivering long tool life when machining composite, titanium and aluminium aircraft skins.

“Most fastener hole tools used today are complex made-to-order tools with long lead-times,” says Georg Roth, product manager at Kennametal. “HiPACS uses standard, off-the-shelf components for quick delivery and low cost per hole, by allowing the drill and chamfer insert to be indexed independently from one another. What’s more, it’s the
only indexable drilling and countersinking system on the market that can hold the aerospace industry’s required fastener hole chamfer tolerances in just one operation.”

Designed to be clamped in a standard hydraulic chuck, the HiPACS modular system consists of three components that are fast and easy to assemble: a reducer sleeve with a built-in high-precision pocket seat which, in conjunction with a standard hydraulic chuck, provides ultra-secure clamping and a runout of no more than 3 µm to increase tool life and hole quality; a PCD countersinking insert that eliminates the need for expensive custom solution step drills, thus reducing manufacturing costs while meeting the industry’s accuracy requirements; and two series of solid-carbide drills – both diamond-coated and PCD-tipped – covering all material combinations found in a typical aerospace assembly. In addition, the straight shanked tools allow for length adjustments in increments of 10 mm.

It is possible to utilise the new HiPACS drilling and countersinking system on all machines typically used for aerospace applications. In less stable conditions, such as robot end effectors, the diamond-coated carbide drills offer long tool life and high hole quality.

For further information
www.kennametal.com

Dormer Pramet has launched a new generation of solid-carbide five-flute end mills, specifically for dynamic milling in general machining and mould and die applications. The company’s S7 assortment covers a wide range of operations in a variety of steels, cast irons and difficult-to-machine materials, including stainless steels and super alloys.

These latest additions – S770HB, S771HB, S772HB and S773HB – offer up to 25% more feed rate potential compared with four-flute cutters. All feature a positive rake angle for smooth cutting action and to reduce the risk of work-hardening. An AlCrN coating provides thermal stability, reduced friction, high wear resistance and prolonged durability.

The S771HB and S773HB cutters are suitable for narrow pocketing, trochoidal slotting and profiling applications. These end mills include a chip divider to break swarf into manageable smaller pieces, helping to reduce spindle load and increase metal removal rates. This capability provides a 50% larger width of cut in comparison to tools without a chip divider.

Dormer Pramet’s S770HB and S772HB are more suitable for profiling, trochoidal slotting, and semi-finishing applications, offering maximum productivity due to optimal metal removal rate and reduced machining time.

Meanwhile, Dormer Pramet has added three multi-application high-performance cutters to its S7 range for use on both CNC and conventional machine tools. The new additions – S722HB, S765HB and S768 – support most common operations, such as slotting, plunging, contour milling, ramping and copy milling in various materials.

Finally, the company has added a new solid-carbide cutter to enhance its assortment of end mills for hardened steel above 49 HRc. The S561 is specifically for high-performance milling in a variety of applications, including mould and die machining.

For further information
www.dormerpramet.com